A Centena Group Company
FacebookLinkedinTwitterYoutubeGoogle+

Langmuir Troughs & Langmuir Blodgett Troughs

///Langmuir Troughs & Langmuir Blodgett Troughs

  • This Product

    Langmuir-Troughs

Langmuir Troughs & Langmuir Blodgett Troughs

KSV NIMA Langmuir and Langmuir-Blodgett Troughs (KSV NIMA L & LB Troughs) are used to fabricate and characterize monomolecular films with precise control of lateral packing density.

Following characterization studies of the unique properties of molecules in monolayers, the instruments can also be used to transfer these monolayers using a Langmuir-Blodgett or Langmuir-Schaefer deposition technique. This enables the creation of single and multi-layer films with precise control of thickness, molecular orientation and packing density.

Category:

Product Description

  • Full control over your experiment:
    • Powerful and intuitive software satisfying novice and experienced user’s needs. See details below.
    • Ultra-sensitive surface pressure sensor for extremely precise measurements. Platinum plates, platinum rod and paper plates can be used as probe to meet all needs.
    • Open design and modularity enables easy placement of trough tops into the frame allowing substitution with another trough top within seconds and easy cleaning of the trough top surface.
    • Langmuir and Langmuir Blodgett trough tops are made from single pieces of pure PTFE for optimized cleanliness and reliability. This unique design prevents any leakage in any part of the trough top including the dipping well. It avoids the use of potentially contaminating glues or other seals.
    • Compression barriers are made from Delrin (hydrophilic), for enhanced monolayer stability. PTFE (hydrophobic) compression barriers can also be supplied upon request. A robust metal frame prevents barriers from deforming over time.
    • Thin frame design allowing combination of optical characterization techniques such as PM-IRRAS (infrared spectroscopy), Brewster Angle Microscopy, and fluorescence microscopy etc.
    • Symmetric barrier compression as a standard for homogenous packing. Single barrier compression is also available with every instrument.
    • Centered dipping well allowing uniform monolayer LB deposition.
    • Sub-phase temperature control facilitated by aluminum heat/cool base plate operated by external circulating water bath (the water bath is sold separately).
    • Adjustable legs enable fast and accurate leveling of the trough. The legs can be removed easily for to place the trough on a microscope.
  • Wide range of accessories (Horizontal dipping clamps, Surface Potential Meter, pH probe, etc.)
  • KSV NIMA’s extensive knowledge and application support team let you get the best out of your instrument.
  • Highly modular thanks to a unique exchangeable trough top mechanism that allows combining all Extra Small, Small and Medium trough tops from KSV NIMA Langmuir and Langmuir-Blodgett selection. You can change functionality of your system, at any time: for instance, exchanging a Langmuir trough top to a LB trough top, or selecting a different size of trough top. All systems except the Alternate are compatible (directly or after upgrade with a new trough top) with KSV NIMA Surface Potential Sensor, Brewster Angle Microscopes (KSV NIMA BAM and/or KSV NIMA MicroBAM) and PM-IRRAS characterization instruments.

  • Biomembranes and biomolecular interactions such as cell membrane models, conformational changes and reactions, drug delivery.
  • Functional and novel coatings of nanoparticles, nanotubes, nanowires, graphene.
  • Interfacial reactions such as polymerization, immunological and enzymatic reactions, biosensors, adsorption and desorption.
  • Surfactants and colloids research including molecule structure and orientation characterization, formulation, emulsion, colloid and foam stability.
  • Rheology of thin films such as, dilational rheology, interfacial shear rheology with the KSV NIMA ISR.

Product Details

The most popular L & LB trough systems are presented in the following table. Other combinations are possible. To find out more—contact your nearest KSV NIMA representative.

KSV NIMA Langmuir Troughs

Standard Langmuir Troughs are available in several sizes: Extra Small (lower volume but larger area than Small), Small, Medium and Large. It is important to stress that all systems can be easily switched between the Langmuir, Langmuir-Blodgett and Microscopy configurations. The three smaller troughs use the same frame providing the flexibility to change the trough top size at any time.

High Compression Trough enables high compression ratios and is specifically designed for the KSV NIMA Interfacial Shear Rheometer (ISR). The High Compression Trough can also be used for increased performance with Brewster Angle Microscope (MicroBAM), Surface Potential Sensor, PM-IRRAS and other characterization instruments.

The Liquid-Liquid Langmuir Trough is available for monolayer studies at the liquid-liquid interface (typically, oil-water). The Liquid-Liquid Trough top is also compatible with the High Compression Trough.

The KSV NIMA Microscopy Trough is a special kind of Langmuir Trough, which contains a sapphire window in the trough top base allowing high optical transmission down to a wavelength of 200 nm (suitable for visible light or UV microscopy). The Medium and the High Compression Troughs are both suitable for upright and inverted microscopy. The Small Trough can be used for upright microscopy.

For more information about Langmuir film microscopy, see:

  • Langmuir Film Microscopy

The Langmuir Ribbon Barrier Trough
enables the study of floating monolayers at high packing densities (e.g. > 70 mN/m for DPPC) by monolayer confinement. Working at high surface pressures is required to study phenomena such as lung surfactant (DPPC) behavior in alveoli.

KSV NIMA Langmuir-Blodgett Troughs

The KSV NIMA LB Trough is also available in several sizes (Small, Medium and Large) and includes the same system flexibility between the Langmuir, Microscopy and Ribbon Barrier configurations.

You can deposit LB films on samples ranging in size from a few square millimeters to many tens of square centimeters. Dipping well dimensions, and hence suitable substrate areas, are dependent on the model of trough and trough tops (see Specification Table). The LB dipping mechanism can also be fitted with a LS deposition kit for horizontal Langmuir-Schaefer Deposition.

The KSV NIMA Alternate Layer Deposition Trough enables simultaneous creation of two Langmuir films in two separate compartments. The sample can be moved through any of the two monolayers in the desired order.

Many experimental techniques can be used to further investigate monolayers at the gas-liquid interface even before deposition, including Interfacial Shear Rheometry, PM-IRRAS, Brewster Angle Microscopy and Surface Potential Sensing.

KSV NIMA LB Software

The KSV NIMA LB software is very intuitive and easy to use. It allows the user to perform a variety of pre-programmed methods that cover the most common L and LB film experiments. These pre-programs can be modified further for particular needs. A wide range of data and parameters can be recorded and the desired data can be easily plotted. The recordable parameters are: data point number, time, barrier position, barrier speed, trough top area, molecular area, dipper position, dipper speed, layer number, transfer ratio, cumulative transfer, temperature, pH and surface potential. The software is Windows 10 compatible.

Standard programs include:
Compression/relaxation isotherms
 Measuring surface pressure as a function of mean molecular area, remaining area, time or any other measured parameter.
Analysis of monolayer kinetics
 Enzyme kinetics, monolayer hydrolysis, polymerization, or any other zero-order reactions.
Analysis of monolayer penetration, solubility and binding of biomolecules
 Enzymes, proteins, peptides etc.
Isochores and Isobars
 Increase or decrease of surface pressure/temperature, surface pressure/time, or surface pressure/any desired measurable parameter can be plotted.
Dilational rheology
 Oscillating barriers for monitoring viscoelastic properties at desired surface pressure.
Dipping
 Both Langmuir-Blodgett and Langmuir-Schaefer modes allow the control and monitoring of surface pressure, dipping speed, stroke length, deposition profiles and transfer ratio.

After an experiment has been performed the user can return to the data for further analysis in the data reduction and analysis section. After selecting an experiment the data for that experiment will be displayed. Different experimental data can be displayed on the same graph for comparison. Calculation of additional results and export of data can be done. There is an option of viewing and editing the experimental setup if the data needs to be recalculated with new information about the materials.

Technical specifications

X-Small
Small
Medium
Large
Liquid-
Liquid
ISR High Compression
Alternate

General specifications
Surface area (cm2)

150

98

273

841

580
(4231)

587

586·22
Maximum compression ratio

8.7

5.2

10.8

18

24.7

24.7

3.9
Barrier speed (mm/min)

0.1…270

0.1…270

0.1…270

0.1…270

0.1…270

0.1…270

0.1…270
Balance measuring range (mN/m)

0…300             0…300

0…300

0…300

0…300

0…300

0…300
Maximum balance load (g)

1

1

1

1

1

1

1
Balance resolution (µN/m)

0,1

0,1

0,1

0,1

0,1

0,1

0,1

Trough tops
X-Small
Small
Medium
Large
Liquid-
Liquid
ISR High Compression
Alternate

Inner dimensions ↓
Length (mm)
 300 195 364 580 784 782 782·22
Width (mm)
 50 50 75 145 74
(541)		 75 75·22
Depth (mm)
 1.2 4 4 4 7
(101)		 5 5·22

Langmuir

 √ √ √ √ √ √ –
Total subphase volume (mL)

18

39

109

336

406
(2121)

293

–

Langmuir-Blodgett

–

√

√

√

–

–

√
Total subphase volume (mL)

–

57

176

578

–

–

1400
Dipping well ↓
 – Rectangular Rectangular Rectangular – – Half circle
Length (mm)
 – 20 20 20 – – –
Width (mm)
 – 30 56 110 .– – –
Radius (mm)
 – – – – – – 75
Depth (mm)
 – 30 60 110 – – 74
Maximum sample size ↓

–

(1″)

(2″)

(4″)

–

–
Thickness (mm)
 – 3 3 3 – – 3
Width (mm)
 – 26 52 106 – – 30
Depth (mm)
 – 26 56 106 – – 50
Dipping speed (mm/min)

–

0.1…108

0.1…108

0.1…108

–

–

0.1…108

Upright microscopy

–

√

√

–

–

√

√

Inverted microscopy

–

–

√

–

–

√

√

Ribbon barrier

 – – √ – – – √

Compatibility
X-Small
Small
Medium
Large
Liquid-
Liquid
ISR High Compression
Alternate
PM-IRRAS
 – √ √ √ – √ –
ISR
 – – – – √ √ –
MicroBAM
 – – √ √ – √ √
BAM
 – – – √ – – –
SPOT
 – √ √ √ – √ √4
Frame3
 Standard Large High Compression Alternate

1The Liquid-Liquid Trough is deeper than a standard trough as this allows for the two liquid phases. The value in the brackets corresponds to confinement of the lower phase (other value for the upper phase).

2The Alternate-Layer Deposition Trough is made of two separated compartments for creation of two monolayers simultaneously.

3All trough tops labeled with the same frame name can be placed on the same frame, for modularity.

4 Need extension part for the serial port connections

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products